2019.10 – 至今 中国科学院力学研究所,非线性力学国家重点实验室,智能计算力学
2014.01 – 2019.10 中国科学院力学研究所,流固耦合系统力学重点实验室,耦合计算方法/固体损伤破裂本构模型
2008.09 – 2013.10 中国科学院大学,工学博士,计算力学/工程力学
现代数值计算方法、科学计算软件、工业仿真软件等与云计算的底层融合架构,基于云原生的在线高性能智能计算系统
数值计算方法与数字孪生、机器学习、深度学习、人工神经网络等技术相融合,构建智能计算系统
科研/工程计算数据与区块链融合,构建云端CAE可信计算网络体系
中国科学院计算机网络信息中心 客座研究员
[1]. Numerical modeling for strain rate effect and size effect of ice under uniaxial tension and compression. Communications in Nonlinear Science and Numerical Simulation, 2021
[2]. Quantitative characterization of damage-aggravation effect caused by progressive damage[J]. ACTA MECHANICA SINICA,2021
[3]. A Spectral Microplane Model for the Anisotropic Damage Behavior of Shales. Journal of Applied Mechanics, 2020
[4]. The three-stage model based on strain strength distribution for the tensile failure process of rock and concrete materials. Acta Mechanica Solida Sinica, 2016
[5]. Progressive failure constitutive model of fracture plane in geomaterial based on strain strength distribution. International Journal of Solids and Structures, 2013
[6]. Continuum-discontinuum element method[Ch]. Rock Mechanics and Engineering Volume 3: Analysis, Modeling and Design, CRC Press,2017.
[7]. Structure layer model in CDEM. Proceedings of the 6th International Conference on Discrete Element Methods. Colorado U.S.A, 2013
[8]. A computational model with fracture energy in continuum-discontinuum element method. Proceedings of the 6th International Conference on Discrete Element Methods. Colorado U.S.A, 2013
[9]. Reliability Analysis of Slope Based on Probability Statistics and CDEM. Proceedings of the Third International Symposium on Computational Mechanics (ISCM III), Taipei, TAIWAN, 2011
[10]. Strain Strength Distribution Criterion. Proceedings of the Third International Symposium on Computational Mechanics (ISCM III), Taipei, TAIWAN , 2011
[11]. An Optimized Algorithm for Discrete Element System Analysis using CUDA. Proceedings of the Third International Symposium on Computational Mechanics (ISCM III), Taipei, TAIWAN , 2011
[12]. Slope Progressive Failure Analysis Based on Dimensionless Quantities of Cracks. Proceedings of the Third International Symposium on Computational Mechanics (ISCM III), Taipei, TAIWAN ,2011
[13]. 玛湖凹陷砾岩裂缝扩展数值模拟. 新疆石油地质, 2022
[14]. 页岩水力压裂数值模拟方法 .力学进展,专刊《页岩气开发中的若干前言力学问题》第6章, 2019
[15]. 滑坡研究中的力学方法. 科学出版社,北京,2018
[16]. 基于概率统计的土石混合体边坡可靠度分析方法. 中国安全科学学报. 2018
[17]. 基于SEM的可变形块体离散元法研究. 科技创新导报, 2016
[18]. 连续非连续单元法及其基本模型. 计算力学学报. 2014
[19]. 地质体渐进破坏面的计算模型与剪切面破坏准则. 岩石力学与工程学报, 2013
[20]. 基于破裂度的堆积层滑坡危险性分析方法. 岩石力学与工程学报, 2013
[21]. 水电能源开发中的关键工程地质体力学问题[J]. 中国科学: 物理学 力学 天文学, 2013
[22]. 页岩气开发中的几个关键现代力学问题. 科学通报, 2016
[23]. 基于破裂度可靠性的边坡灾变状态评价方法研究[J]. 岩石力学与工程学报, 2016
[24]. 爆炸载荷作用下岩石损伤破裂过程的数值分析[J]. 岩土工程学报,2014
[25]. 模拟岩石破裂过程的块体单元离散弹簧模型. 岩土力学, 2013
[26]. 脆性材料损伤表述方法及基于应变强度分布破坏准则的计算单元[J]. 水利学报, 2012
[27]. 基于破裂模型及监测位移加载的边坡反分析新方法. 全国环境力学学术研讨会论文摘要集,中国天津,2014
[28]. 连续-非连续元——基于拉哥朗日方程的计算方法. 中国力学大会,中国陕西西安,2013
国家重点研发计划专项项目课题:多物理复杂体系科学计算应用平台
北京市科委重点项目:基于大应变传感器的PE管网智能安全监测系统开发与应用
国家重点基础研究发展计划项目子课题(973子课题):致密储层人工缝网扩展的数值模拟方法研究
中国科学院战略性先导科技专项(B类)子课题:页岩储层压裂数值模拟及软件开发
企业重点研发项目:煤矿井下水力扰动抽采瓦斯数值模拟软件开发
地方重点研发项目:抚顺西露天矿南帮大型滑坡失稳模拟与预测研究
国家重点基础研究发展计划项目课题(973课题):工程地质灾害预测的理论及方法